irongit
Sign inRegister
huncholanehuncholane/dotfilesPublic

Not for normies

dotfiles/tmux-powerline/config.sh
441 lines21 KBBourne Again Shell (bash)
RawDownloadHistory
1# Default configuration file for tmux-powerline.
2# Modeline {
3# vi: foldmarker={,} foldmethod=marker foldlevel=0 tabstop=4 filetype=sh
4# }
5
6# General {
7# Show which segment fails and its exit code.
8export TMUX_POWERLINE_DEBUG_MODE_ENABLED="false"
9# Use patched font symbols.
10export TMUX_POWERLINE_PATCHED_FONT_IN_USE="true"
11
12# The theme to use.
13export TMUX_POWERLINE_THEME="bubbles"
14# Overlay directory to look for themes. There you can put your own themes outside the repo. Fallback will still be the "themes" directory in the repo.
15export TMUX_POWERLINE_DIR_USER_THEMES="${XDG_CONFIG_HOME:-$HOME/.config}/tmux-powerline/themes"
16# Overlay directory to look for segments. There you can put your own segments outside the repo. Fallback will still be the "segments" directory in the repo.
17export TMUX_POWERLINE_DIR_USER_SEGMENTS="${XDG_CONFIG_HOME:-$HOME/.config}/tmux-powerline/segments"
18
19# The initial visibility of the status bar. Can be {"on", "off", "2"}. 2 will create two status lines: one for the window list and one with status bar segments.
20export TMUX_POWERLINE_STATUS_VISIBILITY="on"
21# In case of visibility = 2, where to display window status and where left/right status bars.
22# 0: window status top, left/right status bottom; 1: window status bottom, left/right status top
23export TMUX_POWERLINE_WINDOW_STATUS_LINE=0
24# The status bar refresh interval in seconds.
25# Note that events that force-refresh the status bar (such as window renaming) will ignore this.
26export TMUX_POWERLINE_STATUS_INTERVAL="1"
27# The location of the window list. Can be {"absolute-centre, centre, left, right"}.
28# Note that "absolute-centre" is only supported on `tmux -V` >= 3.2.
29export TMUX_POWERLINE_STATUS_JUSTIFICATION="centre"
30
31# The maximum length of the left status bar.
32export TMUX_POWERLINE_STATUS_LEFT_LENGTH="60"
33# The maximum length of the right status bar.
34export TMUX_POWERLINE_STATUS_RIGHT_LENGTH="90"
35
36# The separator to use between windows on the status bar.
37export TMUX_POWERLINE_WINDOW_STATUS_SEPARATOR=""
38
39# Uncomment these if you want to enable tmux bindings for muting (hiding) one of the status bars.
40# E.g. this example binding would mute the left status bar when pressing <prefix> followed by Ctrl-[
41#export TMUX_POWERLINE_MUTE_LEFT_KEYBINDING="C-["
42#export TMUX_POWERLINE_MUTE_RIGHT_KEYBINDING="C-]"
43# }
44
45# air.sh {
46# The data provider to use. Currently only "openweather" is supported.
47export TMUX_POWERLINE_SEG_AIR_DATA_PROVIDER="openweather"
48# How often to update the weather in seconds.
49export TMUX_POWERLINE_SEG_AIR_UPDATE_PERIOD="600"
50# Location of the JSON parser, jq
51export TMUX_POWERLINE_SEG_AIR_JSON="jq"
52# Your location
53# Latitude and Longitude:
54TMUX_POWERLINE_SEG_AIR_LAT=""
55TMUX_POWERLINE_SEG_AIR_LON=""
56# Your Open Weather API Key:
57TMUX_POWERLINE_SEG_AIR_OPEN_WEATHER_API_KEY=""
58# }
59
60# battery.sh {
61# How to display battery remaining. Can be {percentage, cute, hearts}.
62# export TMUX_POWERLINE_SEG_BATTERY_TYPE="percentage"
63# How may hearts to show if cute indicators are used.
64# export TMUX_POWERLINE_SEG_BATTERY_NUM_HEARTS="5"
65# }
66
67# date.sh {
68# date(1) format for the date. If you don't, for some reason, like ISO 8601 format you might want to have "%D" or "%m/%d/%Y".
69export TMUX_POWERLINE_SEG_DATE_FORMAT="%F"
70# }
71
72# date_week.sh {
73# Symbol for calendar week.
74# export TMUX_POWERLINE_SEG_DATE_WEEK_SYMBOL="󰨳"
75# export TMUX_POWERLINE_SEG_DATE_WEEK_SYMBOL_COLOUR="255"
76# }
77
78# disk_usage.sh {
79# Filesystem to retrieve disk space information. Any from the filesystems available (run "df | awk '{print }'" to check them).
80export TMUX_POWERLINE_SEG_DISK_USAGE_FILESYSTEM="/"
81# }
82
83# dropbox_status.sh {
84# The Dropbox glyph to use
85export TMUX_POWERLINE_SEG_DROPBOX_GLYPH=""
86# Replace 'Uploading' in the status
87export TMUX_POWERLINE_SEG_DROPBOX_UPLOAD_GLYPH=""
88# Replace 'Downloading' in the status
89export TMUX_POWERLINE_SEG_DROPBOX_DOWNLOAD_GLYPH=""
90# Replace 'Indexing' in the status
91export TMUX_POWERLINE_SEG_DROPBOX_INDEX_GLYPH=""
92# Replace 'Syncing' in the status
93export TMUX_POWERLINE_SEG_DROPBOX_SYNC_GLYPH=""
94# }
95
96# earthquake.sh {
97# The data provider to use. Currently only "goo" is supported.
98export TMUX_POWERLINE_SEG_EARTHQUAKE_DATA_PROVIDER="goo"
99# How often to update the earthquake data in seconds.
100# Note: This is not an early warning detector, use this
101# to be informed about recent earthquake magnitudes in your
102# area. If this is too often, goo may decide to ban you form
103# their server
104export TMUX_POWERLINE_SEG_EARTHQUAKE_UPDATE_PERIOD="600"
105# Only display information when earthquakes are within this many minutes
106export TMUX_POWERLINE_SEG_EARTHQUAKE_ALERT_TIME_WINDOW="60"
107# Display time with this format
108export TMUX_POWERLINE_SEG_EARTHQUAKE_TIME_FORMAT='(%H:%M)'
109# Display only if magnitude is greater or equal to this number
110export TMUX_POWERLINE_SEG_EARTHQUAKE_MIN_MAGNITUDE="3"
111# }
112
113# gcalcli.sh {
114# gcalcli uses 24hr time format by default - if you want to see 12hr time format, set TMUX_POWERLINE_SEG_GCALCLI_MILITARY_TIME_DEFAULT to 0
115export TMUX_POWERLINE_SEG_GCALCLI_24HR_TIME_FORMAT="1"
116# }
117
118# github_notifications.sh {
119# Github token (https://github.com/settings/tokens) with at least "notifications" scope
120export TMUX_POWERLINE_SEG_GITHUB_NOTIFICATIONS_TOKEN=""
121# Include available notification reasons (https://docs.github.com/en/rest/activity/notifications?apiVersion=2022-11-28#about-notification-reasons),
122# in the format "REASON:SEPARATOR"
123# export TMUX_POWERLINE_SEG_GITHUB_NOTIFICATIONS_REASONS="approval_requested:-󰴄 |assign:-󰎔 |author:-󰔗 |comment:- |ci_activity:-󰙨 |invitation:- |manual:-󱥃 |mention:- |review_requested:- |security_alert:-󰒃 |state_change:-󱇯 |subscribed:- |team_mention:- "
124# Or if you don't like so many symbols, try the abbreviation variant
125# export TMUX_POWERLINE_SEG_GITHUB_NOTIFICATIONS_REASONS="approval_requested:areq|assign:as|author:au|comment:co|ci_activity:ci|invitation:in|manual:ma|mention:me|review_requested:rreq|security_alert:sec|state_change:st|subscribed:sub|team_mention:team"
126# Use symbol mode (ignored if you set TMUX_POWERLINE_SEG_GITHUB_NOTIFICATIONS_REASONS yourself)
127# export TMUX_POWERLINE_SEG_GITHUB_NOTIFICATIONS_SYMBOL_MODE="yes"
128# Summarize all notifications
129# export TMUX_POWERLINE_SEG_GITHUB_NOTIFICATIONS_SUMMARIZE="no"
130# Hide if no notifications
131# export TMUX_POWERLINE_SEG_GITHUB_NOTIFICATIONS_HIDE_NO_NOTIFICATIONS="yes"
132# Only show new notifications since date (default: today) (takes up to UPDATE_INTERVAL time to take effect)
133# export TMUX_POWERLINE_SEG_GITHUB_NOTIFICATIONS_SINCE="$(date +%Y-%m-%dT00:00:00Z)"
134# Enable show only notifications since date (takes up to UPDATE_INTERVAL time to take effect)
135# export TMUX_POWERLINE_SEG_GITHUB_NOTIFICATIONS_SINCE_ENABLE="no"
136# Maximum notifications to retreive per page (upstream github default per_page, 50)
137# export TMUX_POWERLINE_SEG_GITHUB_NOTIFICATIONS_PER_PAGE="50"
138# Maximum pages to retreive
139# export TMUX_POWERLINE_SEG_GITHUB_NOTIFICATIONS_MAX_PAGES="10"
140# Update interval to pull latest state from github api
141# export TMUX_POWERLINE_SEG_GITHUB_NOTIFICATIONS_UPDATE_INTERVAL="60"
142# Enable Test Mode (to test how the segment will look like when you have notifications for all types/reasons)
143# export TMUX_POWERLINE_SEG_GITHUB_NOTIFICATIONS_TEST_MODE="no"
144# }
145
146# hostname.sh {
147# Use short or long format for the hostname. Can be {"short, long"}.
148export TMUX_POWERLINE_SEG_HOSTNAME_FORMAT="short"
149# }
150
151# ifstat.sh {
152# Symbol for Download.
153# export TMUX_POWERLINE_SEG_IFSTAT_DOWN_SYMBOL="⇊"
154# Symbol for Upload.
155# export TMUX_POWERLINE_SEG_IFSTAT_UP_SYMBOL="⇈"
156# Symbol for Ethernet.
157# export TMUX_POWERLINE_SEG_IFSTAT_ETHERNET_SYMBOL="󰈀"
158# Symbol for WLAN.
159# export TMUX_POWERLINE_SEG_IFSTAT_WLAN_SYMBOL="󱚻"
160# Symbol for WWAN.
161# export TMUX_POWERLINE_SEG_IFSTAT_WWAN_SYMBOL=""
162# Separator for Interfaces.
163# export TMUX_POWERLINE_SEG_IFSTAT_INTERFACE_SEPARATOR=" | "
164# Space separated list of interface names to be excluded. substring match, regexp can be used.
165# Examples:
166# export TMUX_POWERLINE_SEG_IFSTAT_INTERFACE_EXCLUDES="tun" # will exclude 'tun0', 'utun0', 'itun', 'tun08127387'
167# export TMUX_POWERLINE_SEG_IFSTAT_INTERFACE_EXCLUDES="tun0 tuntun" # will exclude 'tun0', 'utun0', 'tuntun'
168# export TMUX_POWERLINE_SEG_IFSTAT_INTERFACE_EXCLUDES="^tun0$ ^tun1$" # excludes exactly 'tun0' and 'tun1'
169# Default:
170# export TMUX_POWERLINE_SEG_IFSTAT_INTERFACE_EXCLUDES="^u?tun[0-9]+$"
171# }
172
173# kubernetes_context.sh {
174# Kubernetes config context display mode {"name_namespace", "name", "namespace"}.
175# export TMUX_POWERLINE_SEG_KUBERNETES_CONTEXT_DISPLAY_MODE="name_namespace"
176# Kubernetes config context symbol.
177# export TMUX_POWERLINE_SEG_KUBERNETES_CONTEXT_SYMBOL="󱃾"
178# Kubernetes config context symbol colour.
179# export TMUX_POWERLINE_SEG_KUBERNETES_CONTEXT_SYMBOL_COLOUR="255"
180# Separator for display mode "name_namespace"
181# TMUX_POWERLINE_SEG_KUBERNETES_CONTEXT_SEPARATOR="󰿟"
182# }
183
184# lan_ip.sh {
185# Symbol for LAN IP.
186# export TMUX_POWERLINE_SEG_LAN_IP_SYMBOL="ⓛ "
187# Symbol colour for LAN IP
188# export TMUX_POWERLINE_SEG_LAN_IP_SYMBOL_COLOUR="255"
189# }
190
191# macos_notification_count.sh {
192
193# }
194
195# mailcount.sh {
196# Mailbox type to use. Can be any of {apple_mail, gmail, maildir, mbox, mailcheck}
197export TMUX_POWERLINE_SEG_MAILCOUNT_MAILBOX_TYPE=""
198
199## Gmail
200# Enter your Gmail username here WITH OUT @gmail.com.( OR @domain)
201export TMUX_POWERLINE_SEG_MAILCOUNT_GMAIL_USERNAME=""
202# Google password. Recomenned to use application specific password (https://accounts.google.com/b/0/IssuedAuthSubTokens) Leave this empty to get password from OS X keychain.
203# For macOS users : MAKE SURE that you add a key to the keychain in the format as follows
204# Keychain Item name : http://<value-you-fill-in-server-variable-below>
205# Account name : <username-below>@<server-below>
206# Password : Your password ( Once again, try to use 2 step-verification and application-specific password)
207# See http://support.google.com/accounts/bin/answer.py?hl=en&answer=185833 for more info.
208export TMUX_POWERLINE_SEG_MAILCOUNT_GMAIL_PASSWORD=""
209# Domain name that will complete your email. For normal GMail users it probably is "gmail.com but can be "foo.tld" for Google Apps users.
210export TMUX_POWERLINE_SEG_MAILCOUNT_GMAIL_SERVER="gmail.com"
211# How often in minutes to check for new mails.
212export TMUX_POWERLINE_SEG_MAILCOUNT_GMAIL_INTERVAL="5"
213
214## Maildir
215# Path to the maildir to check.
216export TMUX_POWERLINE_SEG_MAILCOUNT_MAILDIR_INBOX="/home/huncho/.mail/inbox/new"
217
218## mbox
219# Path to the mbox to check.
220export TMUX_POWERLINE_SEG_MAILCOUNT_MBOX_INBOX="/var/spool/mail/huncho"
221
222## mailcheck
223# Optional path to mailcheckrc
224export TMUX_POWERLINE_SEG_MAILCOUNT_MAILCHECKRC="/home/huncho/.mailcheckrc"
225# }
226
227# mode_indicator.sh {
228# Whether the normal & prefix mode section should be enabled. Should be {"true, "false"}.
229export TMUX_POWERLINE_SEG_MODE_INDICATOR_NORMAL_AND_PREFIX_MODE_ENABLED="true"
230# Normal mode text & color overrides. Defaults to "normal" & the segment foreground color set in the theme used.
231export TMUX_POWERLINE_SEG_MODE_INDICATOR_NORMAL_MODE_TEXT="normal"
232export TMUX_POWERLINE_SEG_MODE_INDICATOR_NORMAL_MODE_TEXT_COLOR=""
233# Prefix mode text & color overrides. Defaults to "prefix" & the segment foreground color set in the theme used.
234export TMUX_POWERLINE_SEG_MODE_INDICATOR_PREFIX_MODE_TEXT="prefix"
235export TMUX_POWERLINE_SEG_MODE_INDICATOR_PREFIX_MODE_TEXT_COLOR=""
236# Whether the mouse mode section should be enabled. Should be {"true, "false"}.
237export TMUX_POWERLINE_SEG_MODE_INDICATOR_MOUSE_MODE_ENABLED="true"
238# Mouse mode text & color overrides. Defaults to "mouse" & the segment foreground color set in the theme used.
239export TMUX_POWERLINE_SEG_MODE_INDICATOR_MOUSE_MODE_TEXT="mouse"
240export TMUX_POWERLINE_SEG_MODE_INDICATOR_MOUSE_MODE_TEXT_COLOR=""
241# Whether the copy mode section should be enabled. Should be {"true, "false"}.
242export TMUX_POWERLINE_SEG_MODE_INDICATOR_COPY_MODE_ENABLED="true"
243# Copy mode text & color overrides. Defaults to "copy" & the segment foreground color set in the theme used.
244export TMUX_POWERLINE_SEG_MODE_INDICATOR_COPY_MODE_TEXT="copy"
245export TMUX_POWERLINE_SEG_MODE_INDICATOR_COPY_MODE_TEXT_COLOR=""
246# Suspend mode text & color overrides. Defaults to "SUSPEND" & the segment foreground color set in the theme used.
247export TMUX_POWERLINE_SEG_MODE_INDICATOR_SUSPEND_MODE_TEXT="SUSPEND"
248export TMUX_POWERLINE_SEG_MODE_INDICATOR_SUSPEND_MODE_TEXT_COLOR=""
249# Separator text override. Defaults to " • ".
250export TMUX_POWERLINE_SEG_MODE_INDICATOR_SEPARATOR_TEXT=" • "
251# }
252
253# now_playing.sh {
254# Music player to use. Can be any of {audacious, banshee, cmus, apple_music, itunes, lastfm, plexamp, mocp, mpd, mpd_simple, pithos, playerctl, rdio, rhythmbox, spotify, file}.
255export TMUX_POWERLINE_SEG_NOW_PLAYING_MUSIC_PLAYER="spotify"
256# File to be read in case the song is being read from a file
257export TMUX_POWERLINE_SEG_NOW_PLAYING_FILE_NAME=""
258# Maximum output length.
259export TMUX_POWERLINE_SEG_NOW_PLAYING_MAX_LEN="40"
260# How to handle too long strings. Can be {trim, roll}.
261export TMUX_POWERLINE_SEG_NOW_PLAYING_TRIM_METHOD="trim"
262# Characters per second to roll if rolling trim method is used.
263export TMUX_POWERLINE_SEG_NOW_PLAYING_ROLL_SPEED="2"
264# Mode of roll text {"space", "repeat"}. space: fill up with empty space; repeat: repeat text from beginning
265# export TMUX_POWERLINE_SEG_NOW_PLAYING_ROLL_MODE="repeat"
266# Separator for "repeat" roll mode
267# export TMUX_POWERLINE_SEG_NOW_PLAYING_ROLL_SEPARATOR="  "
268# If set to 'true', 'yes', 'on' or '1', played tracks will be logged to a file.
269# export TMUX_POWERLINE_SEG_NOW_PLAYING_TRACK_LOG_ENABLE="false"
270# If enabled, log played tracks to the following file:
271# export TMUX_POWERLINE_SEG_NOW_PLAYING_TRACK_LOG_FILEPATH="/home/huncho/.now_playing.log"
272# Maximum number of logged song entries. Set to "unlimited" for unlimited entries.
273# export TMUX_POWERLINE_SEG_NOW_PLAYING_TRACK_LOG_MAX_ENTRIES="100"
274
275# Hostname for MPD server in the format "[password@]host"
276export TMUX_POWERLINE_SEG_NOW_PLAYING_MPD_HOST="localhost"
277# Port the MPD server is running on.
278export TMUX_POWERLINE_SEG_NOW_PLAYING_MPD_PORT="6600"
279# Song display format for mpd_simple. See mpc(1) for delimiters.
280export TMUX_POWERLINE_SEG_NOW_PLAYING_MPD_SIMPLE_FORMAT="%artist% - %title%"
281# Song display format for playerctl. see "Format Strings" in playerctl(1).
282export TMUX_POWERLINE_SEG_NOW_PLAYING_PLAYERCTL_FORMAT="{{ artist }} - {{ title }}"
283# Song display format for rhythmbox. see "FORMATS" in rhythmbox-client(1).
284export TMUX_POWERLINE_SEG_NOW_PLAYING_RHYTHMBOX_FORMAT="%aa - %tt"
285
286# Last.fm
287# Set up steps for Last.fm
288# 1. Make sure jq(1) is installed on the system.
289# 2. Create a new API application at https://www.last.fm/api/account/create (name it tmux-powerline) and copy the API key and insert it below in the setting TMUX_POWERLINE_SEG_NOW_PLAYING_LASTFM_API_KEY
290# 3. Make sure the API can access your recently played song by going to you user privacy settings https://www.last.fm/settings/privacy and make sure "Hide recent listening information" is UNCHECKED.
291# Username for Last.fm if that music player is used.
292export TMUX_POWERLINE_SEG_NOW_PLAYING_LASTFM_USERNAME=""
293# API Key for the API.
294export TMUX_POWERLINE_SEG_NOW_PLAYING_LASTFM_API_KEY=""
295# How often in seconds to update the data from last.fm.
296export TMUX_POWERLINE_SEG_NOW_PLAYING_LASTFM_UPDATE_PERIOD="30"
297# Fancy char to display before now playing track
298export TMUX_POWERLINE_SEG_NOW_PLAYING_NOTE_CHAR="♫"
299
300# Plexamp
301# Set up steps for Plexamp
302# 1. Make sure jq(1) is installed on the system.
303# 2. Make sure you have an instance of Tautulli that is accessible by the computer running tmux-powerline.
304# Username for Plexamp if that music player is used.
305export TMUX_POWERLINE_SEG_NOW_PLAYING_PLEXAMP_USERNAME=""
306# Hostname for Tautulli server in the format "[password@]host"
307export TMUX_POWERLINE_SEG_NOW_PLAYING_PLEXAMP_TAUTULLI_HOST=""
308# API Key for Tautulli.
309export TMUX_POWERLINE_SEG_NOW_PLAYING_PLEXAMP_TAUTULLI_API_KEY=""
310# How often in seconds to update the data from Plexamp.
311export TMUX_POWERLINE_SEG_NOW_PLAYING_PLEXAMP_UPDATE_PERIOD="30"
312# }
313
314# pwd.sh {
315# Maximum length of output.
316export TMUX_POWERLINE_SEG_PWD_MAX_LEN="40"
317# }
318
319# time.sh {
320# date(1) format for the time. Americans might want to have "%I:%M %p".
321export TMUX_POWERLINE_SEG_TIME_FORMAT="%H:%M"
322# Change this to display a different timezone than the system default.
323# Use TZ Identifier like "America/Los_Angeles"
324# export TMUX_POWERLINE_SEG_TIME_TZ=""
325# }
326
327# tmux_mem_cpu_load.sh {
328# Arguments passed to tmux-mem-cpu-load.
329# See https://github.com/thewtex/tmux-mem-cpu-load for all available options.
330# export TMUX_POWERLINE_SEG_TMUX_MEM_CPU_LOAD_ARGS="-v"
331# }
332
333# tmux_session_info.sh {
334# Session info format to feed into the command: tmux display-message -p
335# For example, if FORMAT is '[ #S ]', the command is: tmux display-message -p '[ #S ]'
336export TMUX_POWERLINE_SEG_TMUX_SESSION_INFO_FORMAT="#S:#I.#P"
337# }
338
339# utc_time.sh {
340# date(1) format for the UTC time.
341export TMUX_POWERLINE_SEG_UTC_TIME_FORMAT="%H:%M %Z"
342# }
343
344# vcs_branch.sh {
345# Max length of the branch name.
346export TMUX_POWERLINE_SEG_VCS_BRANCH_MAX_LEN=""
347# Symbol when branch length exceeds max length
348# export TMUX_POWERLINE_SEG_VCS_BRANCH_TRUNCATE_SYMBOL="…"
349# Default branch symbol
350export TMUX_POWERLINE_SEG_VCS_BRANCH_DEFAULT_SYMBOL=""
351# Branch symbol for git repositories
352# export TMUX_POWERLINE_SEG_VCS_BRANCH_GIT_SYMBOL="${TMUX_POWERLINE_SEG_VCS_BRANCH_DEFAULT_SYMBOL}"
353# Branch symbol for hg/mercurial repositories
354# export TMUX_POWERLINE_SEG_VCS_BRANCH_HG_SYMBOL="${TMUX_POWERLINE_SEG_VCS_BRANCH_DEFAULT_SYMBOL}"
355# Branch symbol for SVN repositories
356# export TMUX_POWERLINE_SEG_VCS_BRANCH_SVN_SYMBOL="${TMUX_POWERLINE_SEG_VCS_BRANCH_DEFAULT_SYMBOL}"
357# Branch symbol colour for git repositories
358export TMUX_POWERLINE_SEG_VCS_BRANCH_GIT_SYMBOL_COLOUR="5"
359# Branch symbol colour for hg/mercurial repositories
360export TMUX_POWERLINE_SEG_VCS_BRANCH_HG_SYMBOL_COLOUR="45"
361# Branch symbol colour for SVN repositories
362export TMUX_POWERLINE_SEG_VCS_BRANCH_SVN_SYMBOL_COLOUR="220"
363# }
364
365# vcs_compare.sh {
366# Symbol if local branch is behind.
367# export TMUX_POWERLINE_SEG_VCS_COMPARE_AHEAD_SYMBOL="↑ "
368# Symbol colour if local branch is ahead. Defaults to "current segment foreground colour"
369# export TMUX_POWERLINE_SEG_VCS_COMPARE_AHEAD_SYMBOL_COLOUR=""
370# Symbol if local branch is ahead.
371# export TMUX_POWERLINE_SEG_VCS_COMPARE_BEHIND_SYMBOL="↓ "
372# Symbol colour if local branch is behind. Defaults to "current segment foreground colour"
373# export TMUX_POWERLINE_SEG_VCS_COMPARE_BEHIND_SYMBOL_COLOUR=""
374# }
375
376# vcs_modified.sh {
377# Symbol for count of modified vcs files.
378# export TMUX_POWERLINE_SEG_VCS_MODIFIED_SYMBOL="± "
379# }
380
381# vcs_others.sh {
382# Symbol for count of untracked vcs files.
383# export TMUX_POWERLINE_SEG_VCS_OTHERS_SYMBOL="⋯"
384# }
385
386# vcs_rootpath.sh {
387# Display mode for vcs_rootpath.
388# Example: (name: folder name only; path: full path, w/o expansion; user_path: full path, w/ tilde expansion)
389# export TMUX_POWERLINE_SEG_VCS_ROOTPATH_MODE="name"
390# }
391
392# vcs_staged.sh {
393# Symbol for count of staged vcs files.
394# export TMUX_POWERLINE_SEG_VCS_STAGED_SYMBOL="⊕ "
395# }
396
397# vpn.sh {
398# Mode for VPN segment {"both", "ip", "name"}. both: Show NIC/IP; ip: Show only IP; name: Show only NIC name
399# export TMUX_POWERLINE_SEG_VPN_DISPLAY_MODE="both"
400# Space separated list of tunnel interface names. First match is being used. substring match, regexp can be used.
401# Examples:
402# export TMUX_POWERLINE_SEG_VPN_NICS="tun" # will match 'tun0', 'utun0', 'itun', 'tun08127387'
403# export TMUX_POWERLINE_SEG_VPN_NICS="tun0 tuntun" # will match 'tun0', 'utun0', 'tuntun'
404# export TMUX_POWERLINE_SEG_VPN_NICS="^tun0$ ^tun1$" # exactly 'tun0' and 'tun1'
405# Default:
406# export TMUX_POWERLINE_SEG_VPN_NICS='^u?tun[0-9]+$'
407# Symbol to use for vpn tunnel.
408# export TMUX_POWERLINE_SEG_VPN_SYMBOL="󱠾 "
409# Colour for vpn tunnel symbol
410# export TMUX_POWERLINE_SEG_VPN_SYMBOL_COLOUR="255"
411# Symbol for separator
412# export TMUX_POWERLINE_SEG_VPN_DISPLAY_SEPARATOR="󰿟"
413# }
414
415# wan_ip.sh {
416# Symbol for WAN IP
417# export TMUX_POWERLINE_SEG_WAN_IP_SYMBOL="ⓦ "
418# Symbol colour for WAN IP
419# export TMUX_POWERLINE_SEG_WAN_IP_SYMBOL_COLOUR="255"
420# }
421
422# weather.sh {
423# The data provider to use. Currently only "yrno" is supported.
424export TMUX_POWERLINE_SEG_WEATHER_DATA_PROVIDER="yrno"
425# What unit to use. Can be any of {c,f,k}.
426export TMUX_POWERLINE_SEG_WEATHER_UNIT="c"
427# How often to update the weather in seconds.
428export TMUX_POWERLINE_SEG_WEATHER_UPDATE_PERIOD="600"
429# How often to update the weather location in seconds (this is only used when latitude and longitude settings are set to "auto")
430export TMUX_POWERLINE_SEG_WEATHER_LOCATION_UPDATE_PERIOD="86400"
431# Your location
432# Latitude and Longtitude for use with yr.no
433# Set both to "auto" to detect automatically based on your IP address, or set them manually
434export TMUX_POWERLINE_SEG_WEATHER_LAT="auto"
435export TMUX_POWERLINE_SEG_WEATHER_LON="auto"
436# }
437
438# xkb_layout.sh {
439# Keyboard icon
440export TMUX_POWERLINE_SEG_XKB_LAYOUT_ICON="⌨ "
441# }